Warning! For educational purposes only! Proceed at your own risk! Your provider can block your subscription! If your phone carrier's SIM cards are not COMP128V1 compatible, this method is not for you!
Once again, this document serves to educate and inform you of the possibility of unlocking your iPhone. The items needed to unlock your iPhone are as follows:
- iPhone
- SIM Card Reader/Writer (Infinity USB Unlimited, Dynamite Programmer, etc.)
- SilverCard - Your SIM card must be a V1. and you must be able to get Ki
number)
- Download these 2 files
http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip
http://www.kinforce.com/down/kinforc...rsim/ws109.zip
Put your carrier SIM card in your card programmer and run
Woronscan.
Once you have run woronscan, click on "Tasks" tab, and then click on "IMSI
select".
You will get a IMSI number, write it down, as you will need it later on.
Next, click on the "Task" tab and then select "ICC select". You will now get a ICCID number. Once again, write it down for later use.
Finally, to obtain your Ki number, click on the "Tasks" tab, and then on "Ki search". A popup window will prompt you, in which case, simply select "Search", and wait. This will start The Ki number extraction process. Once completed, you will have your Ki number. Record the information along with the other numbers you previously recorded.
Put your AT&T SIM card in your SIM card reader and
programmer.
Open the program Woronscan and click on "Tasks". Then click on "IMSI select".
You will then have your IMSI number, write it down for later use.
Close Woronscan and remove the SIM card from the reader\programmer
Now you have all "data" requred to make SuperSim card.
The first step it to download & extract the following file; http://www.rapidshare.com/files/47494428/SIM_EMU_6.01_iphone_u1.rar
1. Put your Silvercard into your sim card programmer and
run Sim-Emu 6.01 and Configurator v2.1.
2. Click on the "Configure" Tab and select the "Read from disk" button. Browse
to the folder with your downloaded Flash&EEPROM files. Double click on
SIM_EMU_6.01_iphone_u1.HEX, and then double click on
SIM_EMU_6.01_iphone_u1_EP.HEX. Now they are loaded, positions 0 and 9 are should
be colored red.
3. In position 0, type in the data you obtained earlier from your carrier SIM
with Woronscan - (the IMSI,Ki & ICCID numbers) For the ADN/SMS/FDN number enter
in 161, 15, 4; for the SMS Centre, enter in your carrier SMS center number. Now
select position "9". Here type the IMSI number from your AT&T SIM card. PIN1,
PUK1 are the same text as you entered in position "0". Do not enter anything
else.
4. In "Config mode", ensure the check "Files" circle is selected. Now click on
the "Write to disk" button and wait. You will be asked to save the newly created
SuperSim Flash&Eeprom image files.
5. Write the newly created Flash&Eeprom image files on the Silvercard with your
card reader\programmer software!
Warning! this document to unlock your
iPhone is for educational purposes only!
Proceed at your own risk! Your provider can block your subscription!
If your phone carrier's SIM cards are not COMP128V1 compatible, this method is
not for you!
Home